#
# This is my X.org config for a Matrox G450 dual head with only one monitor
# attached, configured to use a Wacom tablet
#

Section "ServerLayout"
    Identifier     "Matrox PowerDesk configured."
    Screen      0  "Display 1" #RightOf "Display 2"
    #Screen         "Display 2" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "PS/2 Mouse" "CorePointer"
    #
    InputDevice     "cursor"     "AlwaysCore"
    InputDevice     "stylus"     "AlwaysCore"
    InputDevice     "eraser"     "AlwaysCore"
    #
EndSection

Section "Files"
    RgbPath     "/usr/X11R6/lib/X11/rgb"
    ModulePath  "/usr/X11R6/lib/modules"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
    FontPath    "/usr/local/fonts/unicode"
    FontPath    "unix/:7100"
    FontPath    "/usr/X11R6/lib/X11/fonts/misc"
EndSection

Section "Module"
    Load  "ddc"
    Load  "GLcore"
    Load  "dbe"
    Load  "extmod"
    Load  "glx"
    Load  "bitmap"
    Load  "speedo"
    Load  "type1"
    Load  "freetype"
    Load  "record"
#    Load  "wacom"
EndSection

Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "Xinerama"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "keyboard"
    Option      "CoreKeyboard"
    Option      "XkbRules" "xfree86"
    Option      "XkbModel" "pc105"
    Option      "XkbLayout" "us"
    #Option      "XkbLayout" "us_intl"
EndSection

Section "InputDevice"
    Identifier  "PS/2 Mouse"
    Driver      "mouse"
    Option      "Protocol" "PS/2"
    Option      "ZAxisMapping" "4 5"
    Option      "Device" "/dev/psaux"
    Option      "Emulate3Buttons" "true"
    Option      "Emulate3Timeout" "70"
    Option      "SendCoreEvents" "true"
EndSection

Section "InputDevice"
        Identifier "cursor"
        Driver "wacom"
        Option "Device" "/dev/input/event2"
        Option "Type" "cursor"
        Option "USB" "on"
EndSection

Section "InputDevice"
        Identifier "stylus"
        Driver "wacom"
        Option "Device" "/dev/input/event2"
        Option "Type" "stylus"
        Option "USB" "on"
EndSection

Section "InputDevice"
        Identifier "eraser"
        Driver "wacom"
        Option "Device" "/dev/input/event2"
        Option "Type" "eraser"
        Option "USB" "on"
EndSection

#Section "Monitor"
#   Identifier   "Display 1"
#   VendorName   "CPQ"
#   ModelName    "CPQ1330"
#   HorizSync    30.0 - 85.0
#   VertRefresh  50.0 - 150.0
#   Option       "DPMS" "true"
#EndSection

Section "Monitor"
    Identifier   "Display 1"
    VendorName   "CPQ"
    ModelName    "CPQ1330"
    HorizSync    30.0 - 50.0
    VertRefresh  50.0 - 90.0
EndSection

Section "Device"
    Identifier  "MATROX CARD 1"
    Driver      "mga"
    VendorName  "All"
    BoardName   "All"
    BusID       "PCI:1:0:0"
EndSection

#Section "Device"
#   Identifier  "MATROX CARD 2"
#   Driver      "mga"
#   VendorName  "All"
#   BoardName   "All"
#   BusID       "PCI:1:0:0"
#   Screen      1
#EndSection

Section "Screen"
    Identifier "Display 1"
    Device     "MATROX CARD 1"
    Monitor    "Display 1"
    DefaultDepth     24
    SubSection "Display"
        Depth     24
        Modes    "1024x768" "1024x768" "1024x768" "1024x768" "1024x768"
    EndSubSection
EndSection

#Section "Screen"
#   Identifier "Display 2"
#   Device     "MATROX CARD 2"
#   Monitor    "Display 2"
#   DefaultDepth     24
#   SubSection "Display"
#       Depth     24
#       Modes    "1024x768"
#   EndSubSection
#EndSection

Section "DRI"
    Mode         0666
EndSection